Home News Knowledges Compact Flotation Unit Fundamentals and How the SINOKLE CDFU Extends Them

Compact Flotation Unit Fundamentals and How the SINOKLE CDFU Extends Them

2026-11-16 16 readings

Flotation owes its industry standing to a simple fact: bubbles catch what gravity separators miss. In petrochemical and municipal service, flotation removes suspended solids, oil and colloidal matter efficiently, and the compact flotation unit (Compact Flotation Unit, CFU) has become its most space-efficient expression, compact in structure, high in treatment efficiency and low in operating cost.

The working principle in three steps

The CFU separates solids from liquids and liquids from liquids by sticking microbubbles to pollutants. Three steps carry the load. The dissolved air system dissolves air into the water under high pressure, forming supersaturated dissolved-air water. On pressure release, gas-liquid mixing begins: the supersaturated water instantly generates large numbers of microbubbles 10-100 µm in diameter. Separation follows as the microbubbles combine with suspended solids, oil and other pollutants in the water to form flocs lighter than water; these float up as scum, a skimming device removes them, and clarified water discharges from the bottom.

Against conventional flotation units, the CFU packs dissolved air, reaction and separation into one compact structure through optimised hydrodynamic design. Its vertical flow design shortens the hydraulic retention time and adapts to high-load conditions, a natural fit for space-constrained sites.

What the three-step sequence buys is contact efficiency. A dissolved-air vessel, a reaction zone and a separation basin laid out horizontally spend much of their length on moving water between functions; folding them vertically means every bubble released travels a short, predictable path through the freshest flocs. Less residence time for the same capture is the whole game, and it is why the vertical arrangement, not any single component, is the real innovation. The vertical arrangement also sheds scum into a smaller collection area, simplifying skimmer design.

What the SINOKLE CDFU changes

SINOKLE, a domestic leader in flotation technology, launched the CDFU to push several of these dials further at once.

  • High-efficiency dissolved air and release. Conventional dissolved-air efficiency caps microbubble quantity and quality. The CDFU applies the patented vortex gas-liquid mixing technology: a specially designed saturation tank and release device dissolve air more fully, distribute microbubbles more evenly, and hold bubble diameter stably below 30 µm, markedly improving pollutant capture efficiency.
  • Intelligent control. The unit integrates the Internet of Things and AI algorithms to monitor influent quality, dissolved-air pressure, scum thickness and other parameters in real time, adjusting the operating state of the equipment automatically.
  • Modular, shock-resistant construction. Units combine flexibly to match treatment demand, and shock-load resistance runs more than 30% higher than that of conventional equipment, holding efficient operation through high pollutant concentrations or sudden flow changes.
  • Low energy and low carbon. Optimised pump configuration and flow-channel design lift dissolved-air efficiency above 95%; corrosion-resistant materials and a fully enclosed structure avoid secondary pollution, in line with the green development needs under the dual carbon goals.

None of the individual improvements is exotic; the value lies in stacking them. Better bubbles raise capture, capture raises effluent quality, and monitoring keeps both from drifting as the feed wanders. A unit that only did one of the three would still need compensating elsewhere in the train.

The field numbers

Deployments span petroleum refining, coal chemicals and catering wastewater treatment. In one petrochemical oily wastewater project the CDFU replaced the conventional oil separation tank: effluent oil content dropped from 50 mg/L to below 5 mg/L, equipment footprint fell by 60% and operating costs came down 35%. Oilfield service has taken the unit as well, where produced water loads and tight platform space reward exactly the compactness the design delivers.

Retrofit economics deserve a mention alongside greenfield gains. Because the CDFU occupies a fraction of the basin area it replaces, plants rarely face the choice of shutting a line to rebuild; the unit drops into the footprint of the equipment it retires. That matters in refineries and coal chemical plants where a production halt costs more per day than the entire treatment upgrade.

Where the compact form matters most

Footprint decides feasibility more often than efficiency does. Offshore platforms, retrofit projects inside running refineries and municipal plants squeezed by urban growth all face the same constraint: the treatment step must fit into space that already has owners. A vertical, high-load flotation unit that holds bubble size below 30 µm and runs its own monitoring addresses that constraint directly, which explains why compact designs keep displacing rectangular horizontal basins rather than merely complementing them.

Reading the evolution

The step from the CFU to the CDFU is less a novelty than a convergence: hydrodynamic refinement, tighter bubble control and intelligent monitoring arriving together. Engineering detail, in this corner of water treatment, is what converts a proven principle into a unit that treats more water in less space at lower cost, and that is the direction the environmental protection industry and its sustainable development goals are pulling the technology.