Home News Knowledges Fragrance Wastewater Fights Biology: Pretreatment and CDOF Before the Biological Train

Fragrance Wastewater Fights Biology: Pretreatment and CDOF Before the Biological Train

2026-11-16 14 readings

Fragrance production serves the food and personal care industries, and its effluent is among the less friendly streams a treatment plant can receive. The organic fraction carries large amounts of aromatic hydrocarbons, aromatic compounds and their derivatives, more than twenty species in total, including phenol, toluene and benzaldehyde, all of which inhibit microbial growth. Reactor washing and similar operations add large quantities of surfactant on top. The result is wastewater that is high in concentration, variable in quality, rich in organics that suppress microbes and complex in composition. Sent to biology unprepared, it simply will not treat.

Pretreatment first, chosen on the bench

Because the water biodegrades poorly, every workable scheme starts with pretreatment. The candidate processes are micro-electrolysis, micro-electrolysis combined with catalytic oxidation, wet oxidation and ozone oxidation. Which one fits is not decided on paper: a bench-scale process trial makes the call. Once pretreatment has lifted biodegradability, the wastewater moves to an equalisation tank for homogenisation and flow balancing, and only then to the biological stage, which runs anaerobic, denitrification, organic degradation and nitrification in sequence.

Equalisation deserves more credit than it usually gets. Fragrance lines run batch-wise, so the effluent arrives in slugs whose concentration can swing by an order of magnitude within a shift. A well-sized equalisation tank flattens those slugs into a steady feed, which protects the biology from shock loads and keeps the pretreatment chemistry near its design point instead of lurching between underdose and overdose. The surfactant load adds a foaming risk on top, one more reason to feed biology only balanced water.

Where CDOF slots into the scheme

For this stream, SINOKLE combines its in-house CDOF (catalytic dissolved ozone flotation) technology with the biological train. CDOF lowers COD effectively and improves biodegradability, preparing the water for the biology downstream. The abbreviation stands for Cyclonic Dissolved Ozone Flotation unit, and the hardware lives up to the name: advanced ozone oxidation, cyclonic separation and dissolved gas flotation are built into a single unit that removes a wide range of refractory pollutants efficiently in one pass.

Ozone catalytic oxidation keeps the plant simple. The flow sheet is short and the equipment uncomplicated; treatment units are small and compact, the footprint is modest, few electrical devices are needed, and power consumption and operating cost stay low. Operation is convenient and can be automated, which lightens the demands on site staff. When flow or water quality shifts, the process adjusts; it adapts well and tolerates shock loads. It also pairs willingly with other technologies, biological treatment included, so each contributes its strength and performance improves further.

Low mechanical complexity also shows up in the maintenance log. With few rotating parts, no chemical dosing trains to calibrate and no reagent storage to manage, the unit spends its scheduled downtime on inspection rather than repair. Automation shifts the remaining workload toward monitoring, and that in turn reduces the skill floor for site staff, which matters for plants running small crews across multiple shifts.

The bubble generator underneath it all

Micro and nano bubble generation centres on high-efficiency gas dissolution, release and mixing. The bubbles are extremely fine, below 50 microns in diameter. That fineness changes their behaviour in water: they rise slowly, stay in suspension for a long time and dissolve with high efficiency. They also self-oxygenate, carry a negative charge and are rich in strongly oxidising free radicals, properties that a flotation-and-oxidation unit exploits simultaneously.

The reason bubble size matters so much is interfacial area. Halving the bubble diameter roughly doubles the surface available for pollutant contact per unit of gas, while the slow rise extends the contact time through the water column. For an oxidation-flotation hybrid this is doubly useful: the same fine bubbles that float the flocs also transfer ozone into solution faster, so the oxidant gets more chances to react before it escapes to the headspace.

What the pilot test measured

Pilot data put numbers on the claim. With this process, at an ozone dose of 150 mg/L the effluent COD measured 238.8 mg/L, the COD removed came to 186.55 mg/L and the ozone dosage ratio was 0.80. Two conclusions follow. First, part of the macromolecular COD was oxidised into smaller molecules, which improved the biodegradability of the wastewater. Second, the unit carried part of the COD removal load on its own. Both effects prepare the water for the biological stage that follows, which is precisely the job pretreatment is asked to do.

The broader lesson from trials of this kind is about sequencing rather than any single device. Fragrance wastewater punishes plants that send it raw to the aeration basin; it rewards plants that crack the inhibitory organics first, balance the flow, and let biology finish on feed it can actually digest. CDOF earns its place in that sequence by doing the cracking efficiently at low operating cost.