Home News Knowledges Coal-Containing Wastewater in Thermal Power Plants: Sources, Bottlenecks and a Chemical-Free Fix

Coal-Containing Wastewater in Thermal Power Plants: Sources, Bottlenecks and a Chemical-Free Fix

2026-11-20 12 readings

Thermal power generation still leans on coal, and the choice of coal shapes both generation efficiency and environmental performance. Anthracite carries a high calorific value, low ash and very low levels of sulphur, phosphorus and other harmful substances, making it one of the preferred coals for power plants — but it is expensive and in limited supply. Bituminous coal also burns hot yet brings relatively high sulphur content and tends to pollute the air when burned, so it must be desulphurised and dedusted before use. Lignite trades a lower calorific value for abundance and a relatively low price, which is why it is widely used in less developed regions or where fuel prices dominate the budget.

Where the Wastewater Comes From

Coal-containing wastewater is unavoidable in plant operations, arising mainly from coal transport, storage, crushing, screening and washing. Wet coal washing consumes 2-8 m³ of water per tonne of coal and returns it as wastewater. Coal transport generates coal dust and fines through friction and impact, which enter the wastewater system with the water. Cleaning the coal handling equipment — crushers, screens and similar machinery — adds its own share.

The water usually carries large amounts of dust particles, suspended solids and some organic matter, and looks black or greyish black; the bulk density of the suspended solids is generally 2.3 g/cm3. Discharged untreated, it pollutes the environment and throws away valuable water that the plant could otherwise reuse.

The Conventional Train and Its Limits

A typical treatment sequence runs through four steps. Wastewater is first collected in a coal settling pond for primary settling to remove coarse coal fines and suspended solids. Coagulation and sedimentation follow: coagulant aids such as polyaluminium chloride (PAC) and polyacrylamide (PAM) dose the water so fine particles aggregate into larger flocs that settle out easily. The settled water then passes to filtration units — commonly hydrocyclones and multi-media filters — to strip further suspended solids and fine particles, and the sludge from settling and filtration is thickened, dewatered and either discharged or put to resource use.

Plant engineers choose among several common processes: chemical coagulation plus membrane treatment, high-efficiency microporous ceramic filtration, coagulation plus inclined-plate settling plus filtration, and electrocoagulation plus centrifugal settling plus filtration. Each has its own advantages and drawbacks, and each must be selected and optimised against the plant's actual conditions — a fact that becomes painfully obvious during wet seasons, when coal moisture swings and the load on the treatment train swings with it.

The CDFU Alternative

In view of the characteristics of coal wastewater from thermal power plants, SINOKLE Co., Ltd. has drawn on its independently developed CDFU technology and proposed a new process that treats coal wastewater efficiently while meeting process requirements.

The CDFU — Cyclonic Dissolved Gas Flotation Unit — is a compact cyclonic dissolved gas flotation unit that effectively integrates centrifugal separation, dissolved gas flotation and ultrafine bubble generation in a single hybrid device for efficient separation of oily and suspended-solids-laden wastewater. Applied to coal wastewater, it replaces the chemical-heavy conditioning step with purely physical separation, with no lime, no ferric salts and no polymer make-up station to run. Because separation relies on density difference and bubble attachment rather than chemical charge neutralisation, the treated water carries no residual coagulant that would complicate reuse, and the recovered fines can be dewatered without the sticky floc that chemical routes produce.

The process features read like a wish list for plant operators. The process is mature with strong shock resistance and stable, reliable performance. No chemicals, no aged oil and no secondary pollution are involved, so the environmental benefit is real rather than rhetorical. The flow is short, the footprint small, moving parts are few, and operation is simple and cheap. A two-stage configuration absorbs load swings and keeps downstream treatment stable and reliable, which protects the economic return. And the advanced filtration stage holds high precision with stable performance, keeping effluent reliably within standard season after season.

Practical Takeaways for Plant Engineers

Coal-containing wastewater will not disappear from thermal power plants, but the cost of handling it varies enormously with the chosen train. Three checks are worth running before any upgrade decision. First, quantify how much chemical dosing actually costs per year — coagulant, PAM, sludge disposal and the labour behind them — because a physical process that removes that line item changes the payback calculation. Second, measure how often the existing train misses spec during load swings; shock resistance is the property that decides whether effluent compliance is a daily battle or a background condition. Third, look at footprint: settling-plus-filtration chains consume space that skid-mounted flotation units do not. Plants that work through this list usually find the CDFU-based route shortens the train, cuts the chemical bill and holds effluent quality steady, which is exactly what a coal-dependent plant needs as discharge rules continue to tighten.