Fracturing Flowback Fluid at Well Sites: The Three Highs and a Settling-CDOF-CDFU Sequence
Fracturing flowback fluid is the special wastewater generated after fracturing operations in oil and gas fields. Fracturing itself is a common stimulation measure: high-pressure fluid is injected into the formation to create fractures and raise production, and once the operation ends, that fluid mixes with formation fluids and returns to the surface. What comes back carries guar gum, preservatives, gel breakers and petroleum hydrocarbons, together with the assorted chemical additives the operation left behind. Every well campaign produces it in bursts, each burst slightly different from the last, and none of it can simply be trucked to a distant plant at any acceptable cost.
The Three Highs
Field descriptions compress the challenge into three properties: high COD, high stability and high viscosity. Each one feeds the others. The guar gel gives the fluid its viscosity and holds pollutants in a stable structure; the additives keep the emulsion from breaking; and the combined organic load pushes COD far above what ordinary oilfield produced water carries. A jar that looks like thin mud on the wellsite is a liquid that refuses to separate on any reasonable timescale.
Four Difficulties That Shape the Equipment
Composition comes first: many pollutant species at high concentrations, including oils, suspended solids (SS), guar gum and various chemical agents, mean no single removal mechanism covers the whole load. Viscosity and severe emulsification make separation difficult, so settling alone goes nowhere. Water quality and quantity fluctuate widely, which places high demands on the shock resistance and stability of whatever equipment is installed. And the sites themselves are mostly remote well locations with little supporting infrastructure, so the treatment equipment must be highly automated, compact and mobile, because nobody wants to build a permanent plant for a job measured in weeks.
Why Conventional Trains Fall Short
Conventional treatment usually stacks physical sedimentation, chemical flocculation and biological treatment. On paper the sequence looks complete; in the field it suffers from long treatment times, large footprints, high sludge production and low automation. A process train that needs weeks of biological acclimation cannot follow a drilling program from pad to pad, and the sludge volumes floc chemistry generates add a disposal bill that can outweigh the treatment itself. Modern oil and gas field development simply moves faster than those processes can, so the train has to shrink, not the flow.
The SINOKLE Sequence, Step by Step
To address these difficulties, SINOKLE has developed a new process built on four stages, each doing one job the next stage depends on.
- Collection and gravity settling. The flowback fluid is collected in a surface collection pit or tank, where gravity settling removes the large solid particles before anything downstream has to handle them.
- Deep oxidative viscosity reduction. The fluid is treated in a CDOF unit for deep oxidative viscosity reduction, with a catalyst dosed to enhance the oxidation effect. The gel structure is broken chemically rather than diluted, which is what makes everything after this stage possible.
- Flotation. After gel breaking, a dedicated flocculant is dosed and the fluid enters a CDFU unit for flotation, removing suspended solids and oily pollutants in one pass.
- Sludge dewatering and reuse. CDOF and CDFU sludge is dewatered in a screw-press dehydrator, and the separated water returns to the collection pit or tank for recirculation. CDFU treated water, after filtration, meets the requirements for reuse in make-up fluid preparation.
Where the Advantages Sit
The process flow is short, and the skid-mounted equipment can be truck-mounted and operated well by well, giving strong adaptability to the reality of fracturing schedules. The CDOF unit is patented equipment from SINOKLE; oxidation is fast and thorough, quickly breaking the gel and reducing viscosity to raise treatment efficiency. Calcium, magnesium and boron ions are effectively removed, which cuts sludge generation and lowers treatment cost, a benefit that compounds over a long campaign. Retention time runs at only 1/5 of conventional processes and the footprint at only 1/3, so land use drops sharply. The equipment runs sealed, making it safe and environmentally friendly, with fully automatic control that reduces manual operating costs, exactly what a two-person wellsite crew needs.
Field Applications
The process has been applied in a number of fracturing flowback fluid projects across oil and gas fields, and field applications confirm that it treats flowback fluid efficiently, reduces the environmental impact of wastewater discharge and recovers resources from the wastewater. One example is a flowback fluid treatment project at a large oil and gas field where, after adopting the SINOKLE process, treatment efficiency rose markedly and treatment costs fell substantially. Treatment performance records from the Daqing Oilfield waste liquid project and before-and-after water samples from the Ningxia gas field show the same pattern: a fluid that entered as viscous, stable, high-COD waste left as water clean enough to re-enter the fluid preparation loop, and the equipment moved to the next pad without leaving a treatment plant behind.