Thermal Power Plant Oily Water: Three Conventional Flows and the Coalescing Route That Outperforms Them
Thermal power plants generate various oily wastewaters during operation. The sources are routine rather than exotic: fuel oil tank cleaning, flushing after leaks from oil pumps and pipelines, lubricating grease mixed in from the coal handling system, and discharges from pumps in the pump house. These wastewaters are complex in composition, and the treatment difficulties follow from that: crude oil splits into heavy and light fractions, the small treatment volume makes regeneration difficult, emulsified oil settles poorly, and coal-washing wastewater has low oil but much suspended matter and slag. Even with an oil content of only a few hundred mg/L, improper treatment would severely impact the downstream wastewater treatment plant.
Three Conventional Flows and Their Shortcomings
Current common treatment processes fall into three families, each with well-documented weaknesses.
- Composite settling tank plus high-clarity filter: large footprint, high cost, poor shock resistance, low automation, difficult oil recovery and tank cleaning, and major safety and environmental risks.
- Oil separation tank, flotation tank and filtration: conventional flotation struggles with emulsified oil and high-density oil droplets, with poor and unstable effluent; it easily clogs filters and likewise has a large footprint and high cost.
- Standalone oil-water separator: gravity separation alone performs poorly, especially when oil and water densities are close, and tolerates fluctuations poorly. The long retention time means a large footprint; conventional packing coalesces poorly and clogs easily.
The SINOKLE Process for Power Plant Oily Water
To address these challenges, SINOKLE developed an efficient treatment scheme incorporating its core patented products, such as the KHC coalescing oil remover. The process offers strong shock resistance, high efficiency and stable effluent, and it thoroughly solves the power plant wastewater discharge problem. Its core advantages include a short flow with stable results, mainly purely physical treatment that produces little oily sludge; high automation with fully enclosed operation, a small footprint and low labour and maintenance requirements; and several domestically leading patented technologies in the train.
Core Technology: the High-Efficiency Coalescing Pressure Oil Remover
The patented product integrates the coarse-graining principle, the shallow-pool principle and CFD simulation optimisation. Its internal structure, comprising a pre-separation cyclone, coalescing packing zones of different specifications, oil collection pockets and a high-efficiency sand-flushing and desilting device, is rationally designed to achieve rapid oil droplet accumulation, coalescence and flotation separation. The technical advantages are significant:
- Compact structure with a small footprint; oil removal efficiency above 90%.
- Patented structural packing in stainless steel or reinforced PP is strong and long-lived.
- The special sand-flushing and desilting device keeps the packing unclogged and the equipment silt-free, ensuring long-term stable operation with little maintenance.
- Fully enclosed pressurised automatic operation: stable, safe and reliable, with no environmental risk.
Maintenance Realities at a Generating Station
Power plants run lean maintenance crews, so equipment that demands attention loses the argument quickly. The coalescing pressure oil remover was designed with that constraint in view. The sand-flushing and desilting device clears accumulated grit from the packing zones without opening the vessel, which addresses the coal-handling slag that would otherwise blind conventional packing within months. The stainless steel or reinforced PP structural packing resists both corrosion and the mechanical shock of irregular flows, so the packing is a fit-and-forget component rather than an annual consumable. Enclosed pressurised operation removes the open surfaces where power plant vapours would otherwise escape, and automatic control means the unit participates in routine rounds rather than standing as a special watch item. For stations where oil recovery matters, the collection pockets return skimmed oil to storage rather than to the sludge route, keeping a usable fraction out of the waste stream.
A Commissioned Case in Shaanxi
In March 2024 a customised oily wastewater treatment unit for a large combined heat and power project in Shaanxi Province was successfully commissioned. The unit adopts a filter plus high-efficiency coalescing pressure oil remover combined process with a design capacity of 10 m³/h. The wastewater first passes through the filter to remove suspended solids, then enters the high-efficiency oil remover for oil-water separation; the effluent is clear, stable and compliant.
Why the Coalescing Route Fits Power Plants
Power plant oily water is defined by variability rather than volume: light and heavy oil fractions alternate, coal-handling runoff carries grit with its grease, and flows swing with maintenance schedules. Gravity-based trains respond to that variability with wide effluent swings; the coalescing pressure route responds with cyclonic pre-separation that is largely indifferent to density differences and packing that resists the grit-induced clogging which disables conventional cartridge coalescers.
Multiple cases at home and abroad prove that the thermal power plant oily wastewater treatment process from SINOKLE runs reliably, lasts long, removes oil efficiently and performs stably, providing an effective answer to a problem every generating station shares. For plant managers weighing the change, the strongest argument is comparative: every weakness listed against the three conventional flows above maps directly onto a design feature in the coalescing route, which is rarely true of the alternatives on offer.