Coking Sour Water With 16% Oil: Why a Three-Stage Physical Train Beats Chemical Demulsification
Few refinery streams punish treatment equipment like coking sour water. Coming off delayed coking units, it is severely emulsified, extraordinarily oily — averaging over 13.3% oil content and reaching 16% — and loaded with coke powder, ammonia nitrogen, sulfides and volatile phenols. The process answer from SINOKLE is deliberately simple to describe and carefully engineered underneath: a three-stage combination of CDFU, fine filtration and the KHC high-efficiency coalescing separator. What follows breaks the design down at three levels: unit roles, demulsification mechanism, and equipment configuration.
Why Three Stages, Not One
The problem is compound: extremely high oil, extremely deep emulsification, extremely fine solids. Any single unit covers only one of those dimensions. The essence of the three-stage design is progressive escalation by difficulty. The first stage handles volume and solids. The second handles fineness and stability. The third handles the hardest and deepest problems that neither of the first two can finish.
Deleting any stage produces a predictable failure. Remove the first and the high oil concentration plus the coke powder will overwhelm downstream equipment. Remove the second and fine particles will occupy the coalescing cartridge surface and shorten its life dramatically. Remove the third and the finest emulsified oil — the fraction physical coalescence exists to break — cannot be treated, so oil carryover remains in the effluent.
Stage One: CDFU and Its Four Mechanisms
The CDFU is a high-efficiency compact cyclonic dissolved-gas flotation unit whose technical hallmark is integration: cyclonic centrifugal separation, ultrafine bubble generation, dissolved-gas flotation, and coalescing and demulsification technologies all live inside one enclosed pressurized device, achieving fast, efficient separation of waste oil, emulsified oil and suspended solids.
The value of that integration lies in complementary mechanisms. Cyclonic centrifugal force uses density difference to amplify the separation driving force — that solves the speed problem. Ultrafine bubbles provide a vast array of tiny attachment interfaces — that solves the fine oil droplets and coke powder that will not float. Dissolved-gas flotation lifts the pollutants and skims them off — that solves the outlet problem. Coalescence promotes collision and merging of micro oil droplets, while demulsification acts directly on the interfacial film. For coking sour water with its extreme oil load and abundant coke powder, multi-mechanism synergy is simply more reliable than any single mechanism.
Stage Two: The Underrated Stabilizer
Fine filtration sits after the CDFU and before the coalescing separator, with one task: deep removal of suspended solids. After flotation, the oil content of the water has dropped significantly, but fine coke particles and flocs remain. They are small, and their specific surface area is large. Allowed into the coalescing separator, they attach to the cartridge surface and occupy coalescence space that should be reserved for oil droplets. Removing them first is what keeps the third stage performing for years instead of months — fine filtration is the stabilizer whose absence is only noticed when the cartridge fouls early.
Stage Three: KHC and Purely Physical Demulsification
The KHC high-efficiency coalescing separator is the technical high point of the whole process. Its coalescing cartridge is made of special material imported from the United States, able to capture and coalesce extremely fine emulsified oil droplets, achieving demulsification precision down to 0.1 microns. The working process can be understood in three verbs: capture, coalesce, separate.
Capture relies on the special material's affinity for the oil phase: micro oil droplets are adsorbed and retained as they flow through the cartridge. Coalesce relies on oil droplets constantly colliding, merging and growing from small droplets into large ones. Separate relies on the density differences among oil, gas and water, letting the enlarged oil phase naturally rise or stratify and drain. No chemicals are dosed anywhere in the process — that is the fundamental difference from chemical demulsification.
The chain of benefits from going chemical-free runs cleanly downhill: no chemical flocs, so no additional scum; no scum, so one less source of hazardous oily sludge; no acid or alkaline cleaning, so no cleaning wastewater to handle. Conventional flotation-plus-membrane-filtration processes need chemicals or cleaning to keep running, and secondary pollution plus effluent fluctuation follow them. Physical demulsification bypasses that entire cycle by principle, not by careful operation.
Configuration: Skid, Enclosure, Automation
The whole process uses a skid-mounted design with fully enclosed automatic control. The full enclosure targets the high sulfide content of coking sour water specifically: no acidic gas escapes, the site environment stays friendly, and operation remains safe and environmentally reliable. The skid design compresses footprint, schedule and retrofit difficulty, allowing rapid deployment inside existing plants without major civil works.
One Sentence of Logic
Resolve complexity by staging; replace chemicals with physics. The CDFU carries volume and solids, fine filtration carries fineness and stability, and the KHC carries the hardest and deepest fraction. For highly difficult wastewater such as severely emulsified coking sour water, this division of labor has proven more practicable in engineering terms — and far better able to hold the effluent bottom line over the long term.