- The reason and adjustment method of high water content of crude oil after stripping
-
Reasons for high water content of dehydrated crude oil:1 Mixing valve pressure drop is too...
06-17
- Factors affecting desalting rate of crude oil and adjustment methods
-
Factors affecting the desalting rate of crude oil:1 The pressure drop of the mixing valve is...
06-17
- Normal operation of crude oil electric desalting
-
1. Daily operation and inspection of electric desalting(1) Check whether the desalting tank...
06-17
- Instructions for starting and stopping operation of electric desalting of crude oil
-
1. Start operation of electric desalting(1) Preparation1 Notify the maintenance unit such as...
06-17
- Introduction to the process of crude oil electric desalting
-
1. Electric desalting processThe crude oil enters the device from the irrigation area,...
06-17
- What is the basic principle of electric desalination?
-
What is the basic principle of electric desalination?Crude oil electric desalting at the...
06-17
- Why should crude oil be electrodesalted?
-
Why should crude oil be electrodesalted?All kinds of crude oil extracted from the ground...
06-17
- Ozone oxidation technology The latest technical progress
-
On the basis of the research and development of CDFU, Keli Technology creatively introduces...
06-12
- Application of ozone oxidation technology in sewage treatment
-
Wang Yu et al. studied the application of the new technology of high frequency ceramic...
06-12
- Development of wastewater treatment using ozonation technology
-
Meritens was the first to use ozone as a fungicide in drinking water treatment in 1896.The...
06-12
