Heavy Fuel Oil Plant Effluent: Why One Flotation Stage Never Holds at 2000 mg/L

Heavy Fuel Oil Plant Effluent: Why One Flotation Stage Never Holds at 2000 mg/L

2026-09-09

Oily wastewater from heavy fuel oil power stations runs high in oil, heavily emulsified and awkward to treat at acceptable cost. This is a stage-by-stage look at the plant SINOKLE delivered in Bangladesh for BR powergen limited: influent 2000mg/L, effluen

Ultra-Heavy Oil Defeats Gravity Separation: The Sequencing Fix Behind 150,000 to 40 mg/L

Ultra-Heavy Oil Defeats Gravity Separation: The Sequencing Fix Behind 150,000 to 40 mg/L

2026-09-09

Ultra-heavy oil is only marginally lighter than water, so the gravity rise that conventional coalescers depend on never gets going. At SINOKLE's Ningbo ultra-heavy-oil electric-desalting project the answer was sequencing: a coalescing pressure deoiler to

No Chemicals, 250,000 mg/L Inlet: How a Two-Stage Physical Train Reaches 150 mg/L Outlet

No Chemicals, 250,000 mg/L Inlet: How a Two-Stage Physical Train Reaches 150 mg/L Outlet

2026-09-09

A desalting wastewater project in Weifang, Shandong takes 250,000 mg/L of inlet oil down to below 150 mg/L without a single chemical dose. This article breaks down the two-stage physical train behind that result: a coalescence pressure oil remover for the

Choosing an Oil-Water Separation Route for Cogeneration Plants: Where Coalescing Technology Fits

Choosing an Oil-Water Separation Route for Cogeneration Plants: Where Coalescing Technology Fits

2026-09-09

A practical comparison of three oily-wastewater treatment routes for cogeneration power plants, with real commissioning data from a 5 m3/h coalescing separation unit that holds effluent oil below 5 mg/L without chemical dosing.